HUMI Hot & Cool Personal Fan Heater
Frequently Asked Questions
How do I use the hand warming attachment?
Place the hand warmer on the front of the fan. The hand warmer is held in place with magnets. Turn the fan to high speed, then turn the heater function on. Leave the hand warmer attached to the front of the fan for a minimum of 10 minutes. Note: The longer you leave the hand warmer attached to the front of the fan, the longer it will stay warm. When the hand warmer is attached to the front of the fan the fan output will be less powerful. Turn the heater function off then turn the fan off. Wait for 2 minutes. Grip the sides of the hand warmer and pull it off the front of the fan. Your hand warmer is now ready for use.
How do I clean HUMI?
Turn the fan off and remove the plug from the mains socket. Allow the unit and the hand warming attachment to cool before cleaning. Wipe the surface of the fan and the hand warming attachment with a dry cloth.
How do I use the heating function?
Whilst the fan is running at low or high speed, press the Heating button to turn the heater on or off. When the icon is white the heating function is on, when it is not illuminated the function is off. Note: The fan must be turned on to use this function.
How do I use the humidifier function?
Ensure the water tank is full before using this feature. Whilst the fan is running at low or high speed, press the Humidifier button to switch the humidifier on or off. When the icon is white the humidifier function is on, when it is not illuminated the function is off.
How do I use the fan function?
Press the Power/Speed button for 1.5 seconds to turn the fan on to low speed fan and the icon will light up white. Press and hold for a further 1.5 seconds to switch to high fan speed and the icon will light up blue.
How do I fill the water tank?
Pull the water tank lid upwards. Fill the tank with water using the water jug provided. The tank’s capacity is 130ml, to prevent over filling and spillage we recommend filling to 120ml using the measuring jug provided. IMPORTANT: Never place scent or other chemicals in the water tank as they could damage the fan. Close the water tank lid and push down to ensure it is fully closed.
How do I empty the water tank?
Open the tank lid and carefully turn the HUMI unit upside down to pour out any remaining water.
What kind of water should I use with the humidifier?
For the best results and to prolong the life of your appliance, we recommend that you use demineralised, distilled or filtered water. This will prevent the build up of limescale inside your HUMI. You can use tap water, but you will have to regularly descale your fan following the instructions given on this FAQ page.
How do I descale the water tank?
Fill the water tank with 50% lemon juice and 50% water. Plug your fan in and turn the power on. Press the Humidifier button and run until the tank is empty. Repeat the process again but only fill the water tank with water and no lemon juice.
Why has my fan switched itself off?
Check the following;
- Has the product been knocked over? HUMI has an in-built auto off safety feature that will turn the product off if it has been knocked over, simply place HUMI back on a flat surface and use as normal.
- Is the product too hot? HUMI has an inbuilt thermal safety feature that will switch the fan off if it gets too hot. Unplug the product and wait 10 minutes for the product to cool, then use as normal.
How do I get the most out of HUMI as a fan or a heater?
For maximum effect, make sure you take the hand warmer off the front of your HUMI before you use it as a fan or heater.
HUMI Instruction Manual (2mb, PDF)